• FIBARO-SINGLE-SWITCH-2


The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW. 

  • Control the ON-OFF function of a circuit remotely or using a wall switch
  • Compatible with all Z-Wave networks
  • Acts as a repeater expanding your Z-Wave network
  • Wide range of compatibility with existing light fittings and does NOT require expensive cabling
  • Control loads up to 2.0kW (8A)
 
  • Advanced microprocessor control
  •  Active power and energy metering functionality
  • Works with various types of switches – momentary, toggle three-way, etc

The Fibaro Z-Wave Single Switch 2 is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply. 
 

Power and energy consumption.

The Switch 2 allows for the active power and energy consumption monitoring. Data is sent to the main Z-Wave controller, e.g. Home Center, Homeseer, Vera etc..

Measuring is carried out by the most advanced micro-controller technology, assuring maximum accuracy and precision (+/- 1% for loads greater than 5W).

Electric active power – power that energy receiver is changing into a work or a heat. The unit of active power is Watt [W].

Electric energy – energy consumed by a device through a time period. Consumers of electricity in households are billed by suppliers on the basis of active power used in given unit of time. Most commonly measured in kilowatt-hour [kWh]. One kilowatt-hour is equal to one kilowatt of power consumed over period of one hour, 1kWh = 1000Wh.

The Switch 2 require the power consumption of connected load equal to 5W or greater to correctly measure the power and energy.

Power measurement can contain mains voltage fluctuations within +/- 10%.

The Switch 2 stores periodically (every hour) the consumption data in the device memory. Disconnecting the module from the power supply will not erase stored energy consumption data.

Further details are available in the Fibario Manual.  https://manuals.fibaro.com/switch-2/

 

There are no reviews for this product.

Write a review

Please login or register to review

FIBARO SINGLE SWITCH 2

  • Brand: Fibaro
  • Product Code: FGS-213-AUS
  • Availability: 2-3 Days

Related Products

Fibaro Micro Dimmer (V2)

Fibaro Micro Dimmer (V2)

New version - The Fibaro Z-Wave Micro Dimmer (V2) is a highly configurable z-wave dimmer with fe..

Fibaro-Double-Relay-FGS-223

Fibaro-Double-Relay-FGS-223

The FIBARO Double Relay Switch is designed to be installed in standard wall switch boxes or anywhe..

Fibaro Motion Sensor

Fibaro Motion Sensor

Fibaro Motion Sensor is a wireless motion and temperature sensor that communicate via Z-Wave net..

FIBARO HOME CENTER LITE

FIBARO HOME CENTER LITE

FIBARO Home Center Lite is the home automation controller, used to manage the FIBARO system...

FIBARO HOME CENTER 3

FIBARO HOME CENTER 3

The new Home Center 3 is the most advanced and versatile smart home management control..

Tags: Automation, Fibaro, Single Relay, FIBARO SINGLE SWITCH 2